How to Prepare for Cabinet Installation

Make sure to complete each step of a kitchen remodel in the proper order to ensure overall success on your project. The cabinet installation should be done at a specific point in your project to minimize both your efforts and expense. By proceeding on schedule, you can restore your kitchen to working order as quickly and effectively as possible.

Work to Complete First

Prior to installing the cupboards, be sure to complete all plumbing and rough wiring tasks in the kitchen. By working on these tasks first, you eliminate the risk of damaging the new cupboards with the other in-progress construction work. However, it is best not finish the flooring prior to the cupboards. Waiting to complete the floor enables you to use only as much flooring materials as you will need. You also eliminate the risk of damaging the flooring during installation.

Removing the Old Pieces

Remove the old cabinetry carefully to avoid damaging the walls, frame, counter, or anything else in the project area. By proceeding carefully, you may be able to use the old pieces as patterns for the new cabinet installation. Expect the old pieces to be attached to the wall framing with heavy-duty screws or nails. Remove all the doors and removable shelves from upper cupboards to lighten the weight. Remove drawers and shelves from lower units. Have an assistant support the weight of upper cabinetry while you remove the screws or nails from the walls. It may also be necessary to remove screws holding individual cupboards together to enable you to take them down one at a time.

Preparing the New Pieces

Inspect the new units to ensure that you have all the parts. You may need to assemble them following manufacturer instructions. Do not place drawers, shelves, and doors onto the units until after you put them in place in the kitchen to simplify your task.

The Installation Process

Put up the upper units first, because this will enable you to stand directly in front of them to work. To ensure that the units are strong enough to hold excessive weight, you must secure each one into a wall stud. At least three screws must go through the support rail on the back of each unit for maximum security. The screws must go into the wall stud a minimum of 1.5 inches. Use a level to draw lines on the wall to mark the cabinet installation points.

When considering cabinet installation, Flint, MI residents visit Starline Kitchen and Bath Gallery. Learn more about this procedure at

Article Source: